Dihedral Angle Research Articles

Re-examining correlations between synonymous codon usage and protein bond angles in E. coli.

Rosenberg et al. (2022) recently found a surprising correlation between synonymous codon usage and the dihedral bond angles of the resulting amino acid. However, their analysis did not account for the strongest known correlate of codon usage: gene expression. We re-examined the relationship between bond angles and codon usage by applying the approach of Rosenberg et al. to simulated protein-coding sequences that (1) have random codon usage, (2) codon usage determined by mutation biases, and (3) maintain the general relationship between codon usage and gene expression via the assumption of selection-mutation-drift equilibrium. We observed correlations between dihedral bond angle and codon usage when codon usage is entirely random, indicating possible conflation of noise with differences in bond angle distributions between synonymous codons. More relevant to the general analysis of codon usage patterns, we found surprisingly good agreement between the analysis of the real sequences and the analysis of sequences simulated assuming selection-mutation-drift equilibrium, with 91\% of significant synonymous codon pairs detected in the former also detected in the latter. We believe the correlation between codon usage and dihedral bond angles resulted from the variation in codon usage across genes due to the interplay between mutation bias, natural selection for translation efficiency, and gene expression, further underscoring these factors must be controlled for when looking for novel patterns related to codon usage.

Self-Equilibrium Analysis and Minimal Mass Design of Tensegrity Prism Units

Abstract This paper provides a specific analysis strategy for tensegrity prism units with different complexities and connectivity. Through the nodal coordinate matrix and connectivity matrix, we can establish the equilibrium equation of the structure in the self-equilibrium state, and the equilibrium matrix can be obtained. The Singular Value Decomposition (SVD) method can find the self-equilibrium configuration. The torsional angle formula between the upper and bottom surfaces of the prismatic tensegrity structure, which includes complexity and connectivity, can be obtained through the SVD form-finding method. According to the torsional angle formula of the self-equilibrium configuration, we carry out the mechanical analysis of the single node, and the force density relationship between elements is gained. As one of the standards, the mass is used to evaluate the light structure. This paper also studied the minimal mass of the self-equilibrium tensegrity structure with the same complexity in different connectivity and got the minimal mass calculation formula. A six-bar tensegrity prism unit is investigated in this paper, which shows the feasibility of systematic analysis of prismatic structures. This paper provides a theoretical reference for prismatic tensegrity units.

Spatial Structure of the Casoxin D Molecule

ABSTRACT The conformational possibilities of the casoxin D (Tyr1-Val2-Pro3-Phe4-Pro5-Pro6-Phe7) molecule were studied by theoretical conformational analysis. The potential function of the system is chosen as the sum of non-valence, electrostatic and torsion interactions and the energy of hydrogen bonds. The low-energy conformations of the casoxin D molecule, the dihedral angles of the main and side chains of the amino acid residues that make up the molecule were found, and the energy of intra- and interresidual interactions was estimated. It has been shown that the spatial structure of the casoxin D molecule is represented by conformations of eight shapes of the peptide skeleton. The results obtained can be used to elucidate the structural and structural-functional organisation of casoxin molecules.

Factors Causing Unintended Sagittal and Axial Alignment Changes in High Tibial Osteotomy: Comparative 3-Dimensional Analysis of Simulation and Actual Surgery.

Unintended secondary changes in the posterior tibial slope (PTS) and tibial torsion angle (TTA) may occur after medial open-wedge high tibial osteotomy (MOWHTO). In surgical procedures using patient-specific instruments (PSIs), it is essential to reproduce the PTS and TTA that were planned in simulations. To analyze the factors causing unintended sagittal and axial alignment changes after MOWHTO. Case series; Level of evidence, 4. Overall, 63 patients (70 knees) who underwent MOWHTO using a PSI between June 2020 and June 2023 were retrospectively reviewed. Preoperative and postoperative computed tomography scans were 3-dimensionally reconstructed. Simulated osteotomy was performed so that the weightbearing line could pass through the target point. A PSI gapper was 3-dimensionally printed to fit the posteromedial corner of the osteotomy gap in the simulated HTO model. After MOWHTO using the PSI gapper, the actual postoperative model was compared with the preoperative or simulation model. This assessment included PTS, TTA, hinge axis, and osteotomy-related parameters. Cortical breakage around the lateral hinge was evaluated to assess stability. The mean PTS and TTA did not change in the simulation. However, significant changes were observed in the actual postoperative PTS and TTA (change, -2.4°± 2.2° and -3.9°± 4.7°, respectively). The PTS was reduced, while the TTA decreased with internal rotation of the distal fragment. The difference in the axial hinge axis angle (AHA) between the simulation and actual surgery was the factor most correlated with the difference in the PTS (r = 0.625; P < .001). In regression analysis, the difference in the AHA was the only factor associated with the difference in the PTS (β = 0.558; P = .001), and there were no factors that showed any significant associations with the difference in the TTA. In subgroup analyses for the change in the TTA, the correction angle and anterior osteotomy angle were significantly higher in the more internal rotation group (P = .023 and P = .010, respectively). The TTA change was significantly higher in the unstable group with lateral cortical breakage (P = .018). The unstable group was more likely to show an internal rotation of ≥5° (odds ratio, 5.0; P = .007). The AHA was associated with a difference in the PTS between the simulation and actual surgery. The change in the TTA was caused by a combination of multiple factors, such as a large correction angle and anterior osteotomy angle, but mainly by instability of the lateral cortical hinge.

The Coiling Effect in Ether Ionic Liquids: Exploiting Acetate as a Probe for Transport Properties and Microenvironment Analysis.

The inherently high viscosity of ionic liquids (ILs) can limit their potential applications. One approach to address this drawback is to modify the cation side chain with ether groups. Herein, we assessed the structure-property relationship by focusing on acetate (OAc), a strongly coordinating anion, with 1,3-dialkylimidazolium cations with different side chains, including alkyl, ether, and hydroxyl functionalized, as well as their combinations. We evaluated their viscosity, thermal stabilities, and microstructure using Raman and infrared (IR) spectroscopies, allied to density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. The viscosity data showed that the ether insertion significantly enhances the fluidity of the ILs, consistent with the coiling effect of the cation chain. Through a combined experimental and theoretical approach, we analyzed how the OAc anion interacts with ether ILs, revealing a characteristic bidentate coordination, particularly in hydroxyl functionalized ILs due to specific hydrogen bonding with the OH group. IR spectroscopy showed subtle shifts in the acidic hydrogens of imidazolium ring C(2)-H and C(4,5)-H, suggesting weaker interactions between OAc and the imidazolium ring in ether-functionalized ILs. Additionally, spatial distribution functions (SDF) and dihedral angle distribution obtained via AIMD confirmed the intramolecular hydrogen bonding due to the coiling effect of the ether side chain.

Synthesis, crystal structure and Hirshfeld analysis of N-ethyl-2-{3-methyl-2-[(2Z)-pent-2-en-1-yl]cyclopent-2-en-1-ylidene}hydrazinecarbothioamide

The title compound (C14H23N3S, common name: cis-jasmone 4-ethylthiosemicarbazone) was synthesized by the equimolar reaction of cis-jasmone and 4-ethylthiosemicarbazide in ethanol facilitated by acid catalysis. There is one crystallographically independent molecule in the asymmetric unit, which shows disorder of the terminal ethyl group of the jasmone carbon chain [site-occupancy ratio = 0.911 (5):0.089 (5)]. The thiosemicarbazone entity [N—N—C(=S)—N] is approximately planar, with the maximum deviation of the mean plane through the N/N/C/S/N atoms being 0.0331 (8) Å, while the maximum deviation of the mean plane through the five-membered ring of the jasmone fragment amounts to −0.0337 (8) Å. The dihedral angle between the two planes is 4.98 (7)°. The molecule is not planar due to this structural feature and the sp 3-hybridized atoms of the jasmone carbon chain. Additionally, one H...N intramolecular interaction is observed, with graph-set motif S(5). In the crystal, the molecules are connected through pairs of H...S interactions with R 2 2(8) and R 2 1(7) graph-set motifs into centrosymmetric dimers. The dimers are further connected by H...N interactions with graph-set motif R 2 2(12), which are related by an inversion centre, forming a mono-periodic hydrogen-bonded ribbon parallel to the b-axis. The crystal structure and the supramolecular assembly of the title compound are compared with four known cis-jasmone thiosemicarbazone derivatives (two crystalline modifications of the non-substituted form, the 4-methyl and the 4-phenyl derivatives). A Hirshfeld surface analysis indicates that the major contributions for the crystal cohesion are from H...H (70.7%), H...S/S...H (13.5%), H...C/C...H (8.8%), and H...N/N...H (6.6%) interfaces (only the disordered atoms with the highest s.o.f. were considered for the evaluation).

Optically induced charge-transfer in donor-acceptor-substituted p- and m- C2B10H12 carboranes

Icosahedral carboranes, C2B10H12, have long been considered to be aromatic but the extent of conjugation between these clusters and their substituents is still being debated. m- and p-Carboranes are compared with m- and p-phenylenes as conjugated bridges in optical functional chromophores with a donor and an acceptor as substituents here. The absorption and fluorescence data for both carboranes from experimental techniques (including femtosecond transient absorption, time-resolved fluorescence and broadband fluorescence upconversion) show that the absorption and emission processes involve strong intramolecular charge transfer between the donor and acceptor substituents via the carborane cluster. From quantum chemical calculations on these carborane systems, the charge transfer process depends on the relative torsional angles of the donor and acceptor groups where an overlap between the two frontier orbitals exists in the bridging carborane cluster.

Thermal conductivity of wrinkled graphene ring with defects.

Graphene rings have great prospects in the fields of biological modulators, electrochemical biosensors, and resonators, but are prone to wrinkling which can affect their physical properties. This work establishes a theoretical model predicting the torsional wrinkling behavior of defective monolayer graphene rings, which provides direct understanding and reliable accuracy of the wrinkle levels. Then the thermal conductivity of wrinkled graphene rings is studied considering different wrinkle levels, defect concentrations and radii. It is found that with increased radius, defect concentration and torsional angle, the ratio of wrinkle amplitude to wavelength increases gradually. Vacancy defects and radii have more significant influences on the thermal conductivity than torsional wrinkles. The main influence mechanism of wrinkles and defects on thermal conductivity is revealed by phonon density of state. This work provides theoretical guidance for thermal manipulation based on the wrinkle-tuning approach.

Structural Analysis of 3,5-Bistrifluoromethylhydrocinnamic Acid

The crystal structure of 3,5-bistrifluoromethylhydrocinnamic acid [systematic name: 3-[3,5-bis(trifluoromethyl)phenyl]propanoic acid], C11H8F6O2, has been determined and described. The structure was subject to the Hirshfeld surface-analysis and CE-B3LYP interaction-energies calculations. The title compound crystallises in the monoclinic P21/c space group with one molecule in the asymmetric unit. The propanoic acid side chain of the studied molecule has a bent conformation. The key supramolecular motif in the crystal structure is a centrosymmetric O–H∙∙∙O hydrogen-bonded dimer (R22(8) in the graph set notation). According to CE-B3LYP, the molecules involved in this motif exhibit the strongest pairwise interaction total energy (Etot = −67.9 kJ/mol). On the other hand, there are seven other interacting molecular pairs with significant Etot values in the range of −17 to −28 kJ/mol. In these, the energy is dominated by the dispersive contribution. A survey of the Cambridge Structural Database revealed that in other 3-phenylpropanoic acid structures, the middle dihedral angle of the propanoic acid side chain is always in the trans conformation. This contrasts the current structure where this dihedral angle is in the gauche conformation. According to the Density Functional Theory calculations in the gas phase (at the B3LYP/aug-cc-pvDZ level), the presence of the two CF3 groups (strong electron-withdrawing character) increases the population of the gauche conformers by a substituent electronic effect, and this may be a minor factor contributing to the appearance of this conformation observed in the solid state.

Torsion Effects Beyond the δ Bond and the Role of π Metal-Ligand Interactions.

Previous studies on bimetallic paddlewheel compounds have established a direct correlation between metal-metal distance and ligand torsion angles, leading to the rule that higher torsion results in longer metal-metal bond distances. Here, the new discovery based on diarylformamidinateRu₂⁵⁺ paddlewheel compounds [Ru2Cl(DArF)4]that show an opposite behavior is reported: higher torsions lead to shorter metal-metal distances. This discovery challenges the assumption that internal rotation solely impacts the δ bond. By combining experimental and theoretical techniques, it is demostrated that this trend is associated with previously overlooked π metal-ligand interactions. These π metal-ligand interactions are a direct consequence of the paddlewheel structure and the conjugated nature of the bidentate ligands. This findings offer far-reaching insights into the influence of equatorial ligands and their π-conjugation characteristics on the electronic properties of paddlewheel complexes. That this effect is not exclusive of diruthenium compounds but also occurs in other bimetallic cores such as ditungsten or dirhodium is demonstrated, and with other ligands showing allyl type conjugation. These results provide a novel approach for fine-tuning the properties of these compounds with significant implications for materials design.

Spatial Shifts of Reflected Light Beam on Hexagonal Boron Nitride/Alpha-Molybdenum Trioxide Structure.

This investigation focuses on the Goos-Hänchen (GH) and Imbert-Fedorov (IF) shifts on the surface of the uniaxial hyperbolic material hexagonal boron nitride (hBN) based on the biaxial hyperbolic material alpha-molybdenum (α-MoO3) trioxide structure, where the anisotropic axis of hBN is rotated by an angle with respect to the incident plane. The surface with the highest degree of anisotropy among the two crystals is selected in order to analyze and calculate the GH- and IF-shifts of the system, and obtain the complex beam-shift spectra. The addition of α-MoO3 substrate significantly amplified the GH shift on the system's surface, as compared to silica substrate. With the p-polarization light incident, the GH shift can reach 381.76λ0 at about 759.82 cm-1, with the s-polarization light incident, the GH shift can reach 288.84λ0 at about 906.88 cm-1, and with the c-polarization light incident, the IF shift can reach 3.76λ0 at about 751.94 cm-1. The adjustment of the IF shift, both positive and negative, as well as its asymmetric nature, can be achieved by manipulating the left and right circular polarization light and torsion angle. The aforementioned intriguing phenomena offer novel insights for the advancement of sensor technology and optical encoder design.

Comparing of the crystal structures and spectroscopic properties of p-hydroxy styrylquinolinium dye with those of its p-dimethylamino analogue

Two previously synthesized styrylquinolinium dyes, namely (E)-1-butyl-4-(4-(dimethylamino)styryl)quinolinium iodide (D36) and (E)-1-butyl-4-(4-hydroxystyryl)quinolinium iodide (D34), were compared in terms of their properties by single crystal X-ray diffraction (XRD), Hirshfeld surface analysis, Fourier Transform Raman (FT-Raman), Fourier Transform Infrared (FT-IR), Fluorescence, and Ultraviolet–visible (UV–Vis) spectroscopy, and 1H- and 13C-NMR methods. Both dyes D36 and D34 crystallized in the triclinic and monoclinic systems in the centrosymmetric space groups P-1 and P21/n, respectively. The unit cell of D36 contains 2 molecules of the dye, participating in weak intermolecular interactions, while that of D34 contains four formula units. The phenolic hydroxyl group of D34 participates in the formation of a hydrogen bond with the iodide anion. The 4-styrylquinolinium moieties of the cationic dye molecules are nearly planar. The dihedral angle between the mean planes through the ten-membered quinolinium system and the benzene ring is 7.5° in D36 and 5.9(1)° in D34. The structural parameters planarity and bond length alternation (BLA) are discussed, which are important for the evaluation of the first hyperpolarizability β at the molecular level, even in a centrosymmetric crystal. The UV–visible spectra of the dyes in 14 solvents of different polarities were investigated. The reversible solvatochromic behavior of the dyes is demonstrated experimentally and compared with known “binuclear dyes” by evaluating the Rezende model. Dye D36 does not fluoresce, and D34 has a very low emission in the solvents tested.

Synthesis, Spectral Characterization and Photoluminescence of 3-chloro-6-methoxy-2-(methylsulfanyl)quinoxaline in Different Solvents: An Experimental and Theoretical Investigation Using DFT.

In the present work, we synthesized 3-chloro-6-methoxy-2-(methyl sulfanyl) quinoxaline (3MSQ) using a microwave-assisted synthesis method. The physicochemical structural analysis of the synthesized compound utilizing 1H-NMR, 13C-NMR, and FT-IR spectroscopy techniques. The photophysical properties of 3MSQ was examined through absorption and fluorescence spectroscopy. Spectroscopic analyses revealed a bathochromic shift in both absorption and fluorescence spectra, attributed to the π → π* transition. Ground and excited state dipole moments was experimentally determined using the solvatochromic shift method, employing various correlations such as Lippert's, Bakhshiev's, Kawski-Chamma-Viallet's equations, and solvent polarity parameters. Our findings indicate that the excited state dipole moments exceed those of the ground state, suggesting increased polarity in the excited state. Further, the while detailed bond length, bond angles, dihedral angles, Mulliken charge distribution, ground state dipole moments and HOMO-LUMO energy gap estimated through ab initio computations using Gaussian-09W. The value of energy band gap obtained from both the methods are in good agreement. Furthermore, employing DFT computational analysis, we identified reactive centers such as electrophilic and nucleophilic sites using molecular electrostatic potential (MESP) 3D plots. Additionally, CIE chromaticity analysis was performed to understand the photoluminescent properties of 3MSQ. The insights derived from these analyses contribute to a better understanding of the molecule's electronic structure, photophysical properties, and solute-solvent interactions, thus providing valuable information regarding its behaviour and characteristics under diverse conditions. These results contribute to a comprehensive understanding of the molecular structure and properties of 3-chloro-6-methoxy-2-(methyl sulfanyl) quinoxaline (3MSQ).

The influence of anions in the ionic liquid-water mixtures on the conformational structures of emeraldine base and emeraldine salt form of polyaniline

The development of antifouling membranes for water filtration applications is challenging. Conducting polymers can show enhanced antifouling characteristics by blending with various polymers, nanomaterials, and Ionic liquids (ILs). In this paper, we perform an all-atom molecular dynamics simulation on a conducting polymer polyaniline (PANI) immersed in IL-water mixtures. Two forms of PANI were considered, namely Emeraldine base (EB) and Emeraldine salt (ES) as well as two different water-mixed ILs are considered namely (a) 1-ethyl-3-methyl imidazolium [EMIM]+ hexafluorophosphate [PF6]- and (b) 1-ethyl-3-methyl imidazolium [EMIM]+ tetra-fluoroborate [BF4]-. We present various intra- and inter-molecular structural properties, solvation thermodynamics, and dynamic properties. We observe that with an increase in IL concentration, the radius of gyration (Rg) value shows a decrease for ES in pure state in both ILs; on the other hand, we see a minimal increase in the Rg values of EB in both ILs. The dihedral angle distribution analysis shows a combination of gauche and trans state for ES, whereas trans state is more pronounced for the case of EB in both water-IL mixtures. The radial distribution function (RDF) analysis between the ortho, meta carbons of the benzene rings, and the amine groups on ES with [BF4]- and [PF4]- show significant structural peaks. On the other hand, EB and ES show lower interaction with the water molecules. The number of hydrogen bonds (h-bonds) between polymer and water is higher for EB than ES in both IL-water mixtures. The hydrogen bond lifetime (τ) values show one-fold higher values for EB than ES. The self-diffusion coefficient (D) values of water show a decrease with an increase in IL concentration. The thermodynamic properties solvation enthalpy (ΔH) and excess molar volume (VmE) for both ES and EB show a more favorable solvation in [EMIM]+[BF4]- when compared to [EMIM]+[PF6]- with an increase in IL concentration. These observations are crucial for selecting ILs and designing sustainable polymers for antifouling membranes.

Conformers influence on UV-absorbance of avobenzone

Avobenzone is most commonly used FDA approved chemical UV-A filter in many sunscreen formulations. An important drawback of avobenzone is its photounstability and undergoes chemical transformation upon exposure to UV-radiation/sunlight. Eventhough single bond rotations are implicated in the radiation induced chemical modification of avobenzone, the conformers role of avobenzone on UV absorbance is yet to be addressed. Using the In silico platform working on Density Functional Theory (DFT), the communication evaluates the role of conformers on UV absorbance spectra of enol/keto forms of avobenzone. The results indicate that the conformers of enolic-form of avobenzone have broad range of absorbance from 273-389 nm and the keto-form has relatively narrow range of absorbance from 266-288 nm. The chelated conformers of enolic-avobenzone with intramolecular hydrogen bond are swingy in nature yet possessing strong bond contributing to its broad-spectrum UVA filtering activity. Among the conformers of keto-form of avobenzone, the planar conformer with the torsional angle 180° undergo facile Norrish Type-I cleavage. Mapping of the data with previous experimental results has allowed identifying 3D structures involved in the key steps of photoketonization process of avobenzone. The reported results may help to understand the molecular basis of enol-to-keto photochemical transformation of avobenzone and to develop photostabilizer to endure long-lasting photoprotection to avobenzone.

Autonomous flight performance optimization of fixed-wing unmanned aerial vehicle with morphing wingtip

PurposeThe purpose of this paper is to improve autonomous flight performance of a fixed-wing unmanned aerial vehicle (UAV) via simultaneous morphing wingtip and control system design conducted with optimization, computational fluid dynamics (CFD) and machine learning approaches.Design/methodology/approachThe main wing of the UAV is redesigned with morphing wingtips capable of dihedral angle alteration by means of folding. Aircraft dynamic model is derived as equations depending only on wingtip dihedral angle via Nonlinear Least Squares regression machine learning algorithm. Data for the regression analyses are obtained by numerical (i.e. CFD) and analytical approaches. Simultaneous perturbation stochastic approximation (SPSA) is incorporated into the design process to determine the optimal wingtip dihedral angle and proportional-integral-derivative (PID) coefficients of the control system that maximizes autonomous flight performance. The performance is defined in terms of trajectory tracking quality parameters of rise time, settling time and overshoot. Obtained optimal design parameters are applied in flight simulations to test both longitudinal and lateral reference trajectory tracking.FindingsLongitudinal and lateral autonomous flight performances of the UAV are improved by redesigning the main wing with morphing wingtips and simultaneous estimation of PID coefficients and wingtip dihedral angle with SPSA optimization.Originality/valueThis paper originally discusses the simultaneous design of innovative morphing wingtip and UAV flight control system for autonomous flight performance improvement. The proposed simultaneous design idea is conducted with the SPSA optimization and a machine learning algorithm as a novel approach.

3D Slicer open-source software plug-in for vector-based angle calculation of canine hind limb alignment in computed tomographic images.

Severe and complex angular limb deformities in dogs require accurate morphological assessment using diagnostic imaging to achieve successful orthopedic surgery. Computed tomography (CT) is commonly used to overcome projection errors in two-dimensional angular measurements of dog hindlimb alignment. Three-dimensional volume rendering (VR) techniques permit virtual positioning and variable projection, but the final CT-image that defines the projection plane for angular measurements remains two-dimensional. We wanted to develop a true three-dimensional open-source technique to measure the alignments of the hind limbs of dogs in CT scanners. We developed an open-source 3D Slicer plug-in, to perform angular measurements using vector calculations in three-dimensional space. In 113 CT-scans of canine pelvic limbs, femoral torsion, femoral varus, femorotibial rotation, tibial torsion, tibial varus and tibiotalar rotation angles were calculated and compared to an already validated technique using VoXim®. Reference points were identified and measurements were possible in the 113 acquisitions. The greatest difference between the two techniques was 1.4° at only one tibial torsion angle. Mean values for all Bland-Altman plots did not show significant differences and were less than 0.07° for all comparisons. Based on these results we considered angular measurements of canine hind limb alignment in CT scans using the 3D Slicer extension program sufficiently accurate for clinical orthopedic and surgical purposes in veterinary medicine. With our open-source 3D Slicer extension software, we provide a free accessible tool for veterinary orthopedic surgeons and thus we hope to improve angular measurements in CT-scans of canine hind limb deformities through true three-dimensionality.

Effects of Several Auxiliary Acceptors and Anchoring Groups on Charge Transfer and Photophysical Properties of D-A-π-A Type DSSCs: A DFT Study.

In this paper, we performed theoretical studies on the twelve D-A-π-A type organic dyes (G-1 ~ G-3, M-1 ~ M-3, J-1 ~ J-3, and S-1 ~ S-3) with 9-phenylcarbazole as the electron donor in anticipation of the application of these dyes in dye-sensitized solar cells (DSSCs). DFT and TD-DFT methods are applied to investigate in detail the molecular geometries, frontier molecular orbitals (FMOs), absorption spectra, charge density difference (CDD), and transition density matrix (TDM) of several dyes. The results show that the M-series (M-1 ~ M-3) dyes have the largest dihedral angles between the electron donor and the auxiliary acceptor and also has the largest energy gaps in HOMO-LUMO orbitals, which greatly reduces the charge transfer efficiency. Finally, the UV-Vis absorption spectra inferred that the anchoring groups modified with o-nitrobenzoic acid (G-3, M-3, J-3, S-3) can red-shift the absorption peaks of the dyes, which results in higher light-harvesting efficiency and improves the power conversion efficiency of DSSCs. Overall, all of these dyes contribute to the improvement of photovoltaic power conversion efficiency and have potential for application in DSSCs devices.

Exploring Tunable Torsional Mechanical Properties of 3D‐Printed Tubular Metamaterials

Additive manufacturing has proven to be a reliable and quick method for creating devices and tools. One example is 3D‐printed nasal swabs that require robust mechanical strength while maintaining adequate flexibility. However, there is a lack of detailed understanding on the mechanical response of tubular structures under torsion loading. The goal of this work is to understand the torsional behavior of a group of 3D‐printed tubular metamaterials. The idea of mechanical metamaterials is used and it is started with a rectangular lattice. Two main design methods are used: reinforced lattices and compliant lattices. First, diagonal reinforced beams are added to enhance the torsional rigidity. Furthermore, pre‐buckling is added to the straight beam, creating a flexible structure that increases the maximum torsional resistance. The experiments demonstrate that the sponge‐inspired design exhibits enhanced stiffness approximately 21 times that of baseline tubular designs. Moreover, the strength and toughness of the sponge‐inspired design are approximately 2.5 and 3 times higher. By curving the beam, compliant tubulars are created. The torsional angle is increased by at least 2.7 times, while the torsional toughness can reach up to 17 times. Using these two design strategies helps in creating tubular metamaterials with varied applications.

Crystallization-Induced Flower-like Superstructures via Peptoid Helix Assembly.

We report a unique method to construct hierarchical superstructures based on molecular programming of peptidomimetics. Chiral steric hindrance in the polymer backbone stabilizes peptoid helices that crystallize into nanosheets during solvent evaporation. The stacking of nanosheets results in flower-like superstructures. The helical peptoid, nucleated from chiral monomers, is characterized as locally stiffer and more extended than the unstructured peptoid. Molecular dynamics (MD) simulations further suggest a constraint on the dihedral angles and a preference toward the trans configuration, resulting in an extended chain structure. The nanosheet assemblies at various length scales indicate an extent of intermolecular ordering amplified by chiral steric hindrance. Such molecular programming and processing protocols will benefit the future design and controlled assembly of hierarchical peptidomimetics.